Industry-Recognized Data Logger
For a data logger to monitor, test, and analyze asset health and performance, it records sensor data over long periods of time. Yokogawa data loggers surpass the scalability of standard data loggers by utilizing a proprietary block architecture that enables you to easily and flexibly combine various modules, and add expansion modules for up to 450 ch of input (GX/GP). They offer superior savings on rewiring labor and maintenancebecause you can add or remove modules even after installation.
>> Module groups corresponding for various Applications/Measurement targets.
Our data loggers are recognized in the industry for their outstanding measurement accuracy, reliability, noise resistance, and ease-of-use. They support US FDA 21 CFR Part11 (regulations on electronic records and electronic signatures), EU-GMP Annex11, and other associated guidelines for data management as required for development and manufacture in the pharmaceutical and foodstuff industries.
Data Loggers also support data integrity in accordance with ALCOA+. In addition, AMS2750E which is required for heat treatment in the aerospace industry is supported.
- Connection communication function : 920MHz wireless connection, Modbus/TCP, Modbus/RTU, EtherNet/IP, SLMP, OPC-UA, Bluetooth (GM10)
- Network function : HTTP, FTP, SNTP, DHCP, E-mail (SMTP)
Modular GM10
For industrial and lab applications, the GM10 offers Bluetooth wireless connection and modular I/O that offers accurate and reliable measurements.The GM10 also supports 920 MHz band wireless communication.
Touch Screen GX10/GX20
- SMARTDAC+ Touch Screen GX10/GX20
- Multi-point touch screen recorder
- Intuitive design
- Web functionality
- Scalable
- GX20 supports 920 MHz band wireless
Touch Screen GP10/GP20
- SMARTDAC+TM GP10/GP20 Yokogawa Data Logger
- Paperless recorder
- Intuitive, human-centric design
- Web-enabled functionality
- Scalable architecture
GX70SM wireless input unit for SMART 920
The compact and battery-powered analog input module GX70SM uses 920 MHz radio link to connect to the GX20, GP20, or GM10. It can collect a variety of data points from locations that cannot be easily reached or are difficult and expensive to access. Sales area : US and Japan only.
Product Finder
This web tool makes it easier to find products according to the application, measurement conditions and required specifications.
Details
- Application/Measurement
Data Loggers support various applications and measurements up to 450 channels (GX/GP).
The fully modular I/O design allows you to build the system with the channels you need today, and expand the unit's capability any time in the future by purchasing and installing additional modules.
| Module/Unit | Main unit | ||
|---|---|---|---|
| Name | Measurement/Application | Model | |
| Analog input module | DC voltage, DC current, thermocouple, RTD, contact | GX90XA | GM10, GX, GP |
| High withstand voltage AI module: Max. common mode voltage 600V | GX90XA-10-V1 | ||
| High Speed AI | GX90XA-04-H0 | ||
| 4-wire RTD, 4-wire resistance (solid state relay scanner type) | GX90XA-06-R1 | ||
| Analog output module | Current output | GX90YA | |
| Digital input module | Remote control input or operation recording | GX90XD | |
| Digital output module | Alarm output | GX90YD | |
| Digital input/output module | Remote control input or operation recording/alarm output | GX90WD | |
| Pulse intput module | Pulse signal data acquisition, integral count | GX90XP | |
| PID control module | PID module | GX90UT | |
| Wireless input unit for SMART 920 | Wireless, temperature, humidity | GX70SM＊ | |
* Used in combination with the main unit.
Resources
- Application Notes
- eBooks
- Yokogawa Technical Reports
Application Note
Asphalt Blending and Storage
Overview: A leading handler of specialty fluids was looking for a solution to manage various tank farms at many remote locations. The first application was to monitor level and temperature of asphalt storage tanks while performing light control duties including blending. The solution required data-logging, discrete control and a local operator interface for alarm monitoring and blending batches of asphalt.
Application Note
Beverage refrigeration system testing with MW100
Overview: A major soft drink manufacturer dictates strict quality control standards to companies that manufacture vending machines, coolers, and dispensing equipment that handle the branded products of the company. The company operates an engineering lab at corporate headquarters in Atlanta where numerous environmental rooms can simulate any climate condition where a vending machine or cooler may operate.
Application Note
Burn Test in Fire Lab
Overview: A leading manufacturer of fire protection and safety equipment runs multiple tests in a simulated environment to determine if their products will perform to specifications. The existing test procedure was a manual process that required data and reports to be completed by an operator using a combination of a notepad and a spreadsheet.
Application Note
CAN Bus Data Logging with MW100
Overview: In the transportation industry, vehicle manufacturers perform a wide range of performance and durability tests on the complex systems that comprise a modern vehicle. Test parameters cover an equally wide range and include an extensive amount of temperature, pressure, flow, vibration, speed and electrical parameter measurements.
Application Note
High Shear Fluid Processor with MW100 and DXP
Overview: A leading manufacturer of high shear fluid processors was looking for a solution to provide secure, stable pressure readings. The speed of the process typically demands a very fast data-logger with enough intelligence to filter out noise while providing accurate results.
Application Note
MODBUS TCP Interface to AB DH+ for DAQSTATION and MW100
Overview: A manufacturer of lime using an Allen-Bradley Series 5 PLC wanted local data viewing and network connectivity. The PLC was wired directly to a rotary kiln and measured kiln temperature, pressure, rotary speed and material feed rate. Industries:
Application Note
MW100 Wireless System for Process Flow Integration
Overview: A mineral processing company began a project to replace an aging SCADA system that monitors remote process flow data. The existing system is a large, multi-node installation based on standalone RTUs with radio communications to a central processor. Distance between locations is measured in miles.
Application Note
Network DAQSTATION or MW to Delta V
Overview: A Midwest customer is a leading salt manufacturer. They produce a variety of salt products including table salt, pool salt and industrial grade salt. This customer needed to bring data from existing Yokogawa DAQSTATIONS into their Delta V system. Industries:
Application Note
Power Monitoring with MW100 and PR300
Overview: A large OEM parts supplier to the automotive industry has been a Yokogawa customer for several years. In the past, Yokogawa sold the customer field instruments and data logging equipment for measuring and recording environmental conditions within their facility.
eBook
AI Product Solution Book
(ai product solution book download)
Yokogawa Technical Report
DTSX200 Distributed Temperature Sensor for Oil and Gas Production
(rd-te-r05502-010)
Overview: The development of difficult to recover unconventional energy resources, is progressing. Figure 1 shows an example of how unconventional heavy oil is extracted from tar sand by reducing its viscosity with steam. To ensure efficient mining, changes in the underground temperature distribution will need to be monitored. Industries:
Downloads
- Brochures
- Technical Information
Brochures
- (8.3 MB)
- SMARTDAC+ Data Logging Software GA10(4.5 MB)
- Electrolysis Solutions: Instrumentation Solutions for Electrolysis Plant Applications(841 KB)
- SMART 920(4.0 MB)
Technical Information
- MW100 IP Address Setup(460 KB)
News
Press ReleaseMay 29, 2015 Yokogawa Releases SensTation pH/ORP Measurement Solution
Looking for more information on our people, technology and solutions?
Contact Us
